Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
316 Posts
Discussion Starter · #1 · (Edited)
Hey wuz up fellas I'm new to this web site, and I think it's cool and everybody seems to know what there talking about.I need some help deciding wich cam, and roller rockers to go with, with my set up.I have a 92 lx hatch, with a t- 5, and a c&l 76mm mas meter,70mm bbk tb and spacer,edelbrock performer upper and lower intake,headers,x pipe, flows,and 3.55 gears. I'm planning on going with the trick flow twisted wedge heads, but not sure about the cam and rr. I live in california so emissions is an issue.I need a cam that can help me pass smog.I was looking at 2 cams, the trick flow stage 1 but I dont know if that one is smog legal, and the other is the crane cams power max. I know the crane is smog legal and it's designed for computer controlled cars.And also would I have to change the lifters , and I also heard that I might need to change my pistons due to clearance issues. Any suggestions or opinions highly apreciated.
 

·
Registered
Joined
·
4,809 Posts
You might want to double check with trickflow but if I remember correctly you can run 1.7 rockers with Twist wedge heads on a their stage 1 cam.
 

·
Registered
Joined
·
316 Posts
Discussion Starter · #3 ·
what do u think about the crane cam?
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top