Ford Mustang Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have recently acquired a 1968 302 engine originally off of a Galixy. It had a 2 barrel intake but i removed that to put a four barrel intake on. I am wondering what some cheap and easy things to do are, to add power to the engine. I would like to invest in a cam and heads but I'm not really sure the specifics on what to look for.

My main questions are...

If I buy a cam what else will i need to buy?

If I get a new cam will i need new heads?

If I need new heads what work will need to be done to them?

Also what are additional little things that will add a little extra power?

Thank you for your help I appreciate it a lot!!!
 

·
Registered
Joined
·
903 Posts
Welcome to AFM.

What doesn't kill you, makes you stronger. Except for bears, bears will kill you.
 

·
Administrator
Joined
·
8,668 Posts
Welcome to the site! Be sure to check out the tech forum, you may have better luck getting some of questions answered there. Best of luck.
 

·
Registered
Joined
·
54 Posts
welcome! you should not need new heads if you get cams that are for your specific motor.
 
S

·
Guest
Joined
·
0 Posts
Hello, and Welcome to our Great Site here at AFM:bigthumbsup
Make sure that you check out our Year/Platform specific Forum pages so you can Post or just Read about The Stangs that our Members have that are of your Mustangs Same Year/Era
You can Navigate to the whole Site by clicking on the "Forums" Icon at the upper left hand side of this Forum page. Have Fun.
And Thank You for Joining All Ford Mustangs

Sean
:bigthumbsup
 
1 - 6 of 6 Posts
Top