Ford Mustang Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1
Helping my friend rebuild his 302 from his 86 mustang. we have the motor on the stand getting ready to tear down.The parts we are reusing are trick flow track heat intake, 70mm tb, bbk shorty headers, 1.7 rr. He thinking about a 306 , I say 331 or 347. he 's planning on running nitrous in the future so forged pistons are a must.Going to convert to mass air. Need ideas on heads cam rebiuld kit ect. thanks
 

·
Registered
Joined
·
64 Posts
Discussion Starter #2
is there any difference in the blocks in a 86 compare to 87 and up?
 

·
Registered
Joined
·
514 Posts
as far as i know the pistons are the only difference between a 86 and a 87 short block.but i cant remember what the diff is...lol
 

·
Registered
Joined
·
64 Posts
Discussion Starter #4
I know 86 had no valve reliefs, just want to make sure that was all the difference
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top