[kennygunit]

In about a month, im upgrading my rear end to a TCP Rear Pushrod 9" system and was curious as to if i would need to get a new drive shaft.

My current rear differential and transmission is a 8" open diff and C4 transmission. If i do need a new drive shaft, which would one you guys recommend?

Thanks!

 

[andrewmp6]

If you are going to have a lot of power i would have a thicker one made to handle it.There is a few companies online that custom build them or most diesel shops locally can do it also.

 

[kennygunit]

I'm not going to be doing anything to add power just yet. I am going to be swapping out the C4 for a T56, so when i do the swap i will then swap the drive-shaft.

Thanks!

 

[jspagna1]

When you are ready to order, these guys are a good source.

Dennys Driveshaft Ford steel and aluminum driveshafts and driveline parts for your Mustang Fairlane Galaxie Thunderbird Falcon Maverick Lightning race car street rod or restoration project

 

[andrewmp6]

A t56 is longer then a c4 so i would just have one made.

 

[Sharad]

When I put the 9" in my car, I called JC at strangengineering.net and ordered a driveshaft through them. They told me which measurements to take and my custom driveshaft was delivered to my door about a week after the initial phone call. Excellent service! :bigthumbsup