Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hey guys, just joined this site, though not sure why, been using it for years... anyway

we just swapped out the engine on my 93 2.3L distributorless mustang and we are getting spark, compression, air, and fuel but it will not turn over. tried jumping for the extra umph on the starter, but we get nothing. it sounds like its firing on most if not all cylinders usually, but even with the jumper cables and spraying ether in the throttle body before starting we just cant get her to fire up.

btw, the new engine sat for an unknown amount of time in a garage and we changed the fluids til they were the right color already.


if anyone has any suggestions they would be much appreciated.

and if you need any info about the car past what i have here, please feel free to ask.
 

·
Registered
Joined
·
3,900 Posts
Check the compession and post the #. Make sure the TB is on correctly. And make shure the engine is not FLOODED. Thats about i till you post some ests?? Peace tom
 
1 - 3 of 3 Posts
Top