P0172 code after Cam swap

1432 Views 5 Replies 3 Participants Last post by AMAlexLazarus, Jun 12, 2014

GotMyPony

Discussion Starter · Jun 11, 2014

I have a 2009 GT. I have a CAI, Pype bombs and a Bama tune. I had some FRPP cams installed. Three days later it gave me a P0172 code System too Rich Bank 1. I cleared it and it returned again a couple days later. I changed from my 89p tune to the 87e tune and the same result. I am tanking it back in to see what's up with the oxygen. Any additional questions I should ask or thoughts on what I should check? It's my daily driver so I'm hoping to not be down too long. Here is a sound clip. No noticeable sounds or misses. https://www.youtube.com/watch?v=_glny6sZmNA

Save

1 - 6 of 6 Posts

AMAlexLazarus

· #2 · Jun 11, 2014

GotMyPony said:
I have a 2009 GT. I have a CAI, Pype bombs and a Bama tune. I had some FRPP cams installed. Three days later it gave me a P0172 code System too Rich Bank 1. I cleared it and it returned again a couple days later. I changed from my 89p tune to the 87e tune and the same result. I am tanking it back in to see what's up with the oxygen. Any additional questions I should ask or thoughts on what I should check? It's my daily driver so I'm hoping to not be down too long. Here is a sound clip. No noticeable sounds or misses. https://www.youtube.com/watch?v=_glny6sZmNA

OP,

I spoke with one of our tuners and we'd like to get some datalogs from you. Please Shoot Bama call at 888.226.9764 so we can get this sorted or shoot me a PM and I'll have one of our guys reach out to you on this today!

-Alex

Save

joe_momma

· #3 · Jun 11, 2014

I'm assuming you have an updated tune for the cams?

Save

GotMyPony

Discussion Starter · #4 · Jun 11, 2014

Yep got the updated tune and loaded it after the cam install. I did the data log as Bama requested so I guess I'll see what they say.

Save

AMAlexLazarus

· #5 · Jun 12, 2014 (Edited)

GotMyPony said:
Yep got the updated tune and loaded it after the cam install. I did the data log as Bama requested so I guess I'll see what they say.

OP,

Sounds good! I'll touch base with them right now to see how they're making out! Let me know if you have any questions in the meantime and I'm here to help.

-Alex

Save

AMAlexLazarus

· #6 · Jun 12, 2014

Hey OP-

Can you PM me your order number along with the Email address that you used to have this sent over?

-Alex

Save

1 - 6 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month