Ford Mustang Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
where on the back of the TB is the PCV valve, does anyone have a picture, also where is the Fuel Filter, haven't even looked for it but an appx. explanation would be appreciated, also when changing the spark plugs do you need to put lock tight or anything on them, or can you just bolt them straight in. Thanks in advance!:eyepoppin
 

·
Registered
Joined
·
514 Posts
the pcv is in the back on the lower intake...real hard to see even with the upper intake off

the fuel filter is right in front of the gas tank on the right side (just follow the fuel lines back you cant miss it)

you do not want loctite on the plugs...if anything put some never seize on them but dry is fine too
 

·
Registered
Joined
·
70 Posts
Discussion Starter #3
yeah never seize is what I meant, what should I gap the plugs at?? thanks for the information:worship
 

·
Registered
Joined
·
4,807 Posts
Factory gap is 0.055 , I like to use 0.050 .

The pcv valve is in the lower intake at the back. Right in the center. Follow the large vacuum hose that goes to it and you'll find it. Make sure when you change it that you replace the part below it and possibly the grommet.

Advanced auto parts sells the grommet and screen thing below it.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top