[slayton93]

Hey everyone, rebuilding my engine keeping the f303 cam and edelbrock performer intake with edelbrock aluminum heads and wanted to know what to do for the rest.. I would like to get the most power for as cheap as possible. Thanks everyone, happy thanksgiving.

 

[jcardoso91LX]

Just a simple rebuild will help a lot. Roller Rockers if you dont have some.

 

[[email protected]]

Just a simple rebuild will help a lot. Roller Rockers if you dont have some.

+1!

If you plan on going forced induction/ nitrous you may want to make sure you have forged pistons. If your going over 400/450hp you may want a forged crank and connecting rods and for 500+ you want a full forged rotating assembly and aftermarket block.