Ford Mustang Forum banner

Pic of my car with the 2009 FRPP suspension pack

1118 Views 13 Replies 8 Participants Last post by  livin
Land vehicle Vehicle Car Motor vehicle Wheel
Just got the system installed and I have to say it performs beautifully like a completely different car. This pic is with the stock 17's(New wheels coming in Tuesday:gringreen!) It dropped it 1.5" all the way around. Just took the care to the top of Pikes Peak and handled the turns with no sweat.
See less See more
Status
Not open for further replies.
1 - 14 of 14 Posts
Sweet! I am planning on running the FRPP handling pack too. :bigthumbsup What size wheels and tires will you be installing? Please send another pic when you have them on!
Im going with 20" black chrome saleen 7 spoke rims. 10 in the rear 9nin the front. Tires will be 255 35 and 275 35
if i were you id go with a 18" wheel. and the car will lower even more after your springs settle in.
if i were you id go with a 18" wheel. and the car will lower even more after your springs settle in.
i disagree!!!! If your not gunna race with the 20's then get em! 20's looks great!

But in all fairness its all about personal preference... just dont buy 20's with the mindset that your gunna race with them... cuz that would a big :nono:
See less See more
Well now you can carve out some corners real nice. 17`S for racing and handling, 20`s are for show cars.
I wish there were more 19" options out there so I could compromise between the 20" look and the 18" performance. But faced with just those two choices, I'll go 18". I'm thinking the 18" deep dish chrome bullitt's at AM.
Well now you can carve out some corners real nice. 17`S for racing and handling, 20`s are for show cars.
+1 on that :bigthumbsup
These rims really are for looks... I might one day get a set of 18's for the track.
These rims really are for looks... I might one day get a set of 18's for the track.

orrrrrr, keep your stocks for the track and switch whenever you go. Maybe throw a set of Mickey Thompsons Drag Radials on the rear stocks.
These rims really are for looks... I might one day get a set of 18's for the track.
Those rims are gonna look great man! Don't worry about the 20 haters. :bigthumbsup

Oh yeah, and I saw you on StangNet! Those rims are really nice man. I'm considering them for myself... :scratchchin
View attachment 74391 Just got the system installed and I have to say it performs beautifully like a completely different car. This pic is with the stock 17's(New wheels coming in Tuesday:gringreen!) It dropped it 1.5" all the way around. Just took the care to the top of Pikes Peak and handled the turns with no sweat.
Looks good. Did you have any adjustments to make, i.e. panhard bar, camber kit??

+1 on the Deep Dish Bullits. Will be putting some on the wifes GT Vert, when tires need replacing, probably by years end.
See less See more
Because the FRPP suspension pack is designed to work together I ddint need caster cambers or panhard. However, I did order an adj pan with BMR LCA's. When the Ford master technician did the alignment he said everything was perfect. I bought them just in case. That stuff arrives tuesday.
Congrats on the FRPP handling pack - I've got the same kit w/20's and like it.
1 - 14 of 14 Posts
Status
Not open for further replies.
Top