Ford Mustang Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Ok i bkore my ebrake the other week and im in the middle of trying to replace it. i got the consol apart and the cable connect to two of the three points but there is not enough slack in the cable to get the last point connected. is there anyway to get myself maybe an inch more of slack to make the final connection. any ideas would be appreciated
 

·
Registered
Joined
·
149 Posts
There should be some kind of adjuster on one of the cables at the lever or maybe under the car. You need to back the adjuster off enough to get the cable back on then tighten it up so the brake works.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top