Ford Mustang Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
9,109 Posts
Hello.:)That is indeed the cylinder for your power steering.If the little threaded thingy that the bolt screws into(there should be a total of three on the bracket) has broken loose from the frame you have a problem.There is no other access to the back side of the bolt.Sometimes you can get lucky by removing the other two bolts and then shove a pry bar behind the bracket and put as much tension on the bolt as you can with one hand while you try to remove the bolt.If that doesn't work you have two ways to go.Either cut the head off of the bolt to get the bracket out of the way,remove the remainder of the bolt/threaded thingy assembly by whatever means you can and weld something back in to run the new bolt into,or do steps one and two and then cut a hole in the frame big enough to get a wrench into and use a nut on the back of the new bolt.The first plan is far better the second.Hope that helps.:)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top