Ford Mustang Forum banner

problema electrico fox 84 (bobinas, modulo,encendido )

2273 Views 2 Replies 2 Participants Last post by  FOXDOMINATOR'S
Buenos Días , mi gente mi mustang fox 84 me ha presentado varias veces un problema con la bobina, bobina captadora , modulo y switchera , el problema es que me quema las bobinas tanto la seca como la captadora y aveces el modulo... ya cambie :
- cableado desde el corta fuego.
- bobina seca ( 3 veces )
- bobina captadora
- modulo ( 2 veces )
y dura 1 mes y vuelve el problema ..

la falla: no me enciende el carro da arranque pero no enciende..

ayuda: me gustaría conocer a alguien que me ayudara a saber que podría ser la falla !!! GRACIAS

Good morning , my people my 84 mustang fox has presented me several times a problem with the coil , coil pickup , and switchera module , the problem is that I burn both dry as the pickup coils and sometimes the module ... and change :
- Wiring from the short fire.
- Dry coil (3 times)
- Coil pickup
- Module ( 2 times)
and lasts one month and becomes the problem ..

the fault: the car does not turn me cranking but no lights ..

Help : I would like to meet someone to help me know what could be the fault !!! THX
1 - 2 of 3 Posts

Thanks , if you already several of these things I have reviewed. from the ground wires until main power wires , the alternator was repaired 1 month, right now I have not rechecked would have to review it again. I think the problem comes from the ignition switch and wiring cane . many thanks for the help , man.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.