Ford Mustang Forum banner

problems: march a.c. eliminator, keeping p.s.

1290 Views 3 Replies 2 Participants Last post by  privatejoker
I understand how the bracket and tensioner bolt to the waterpump, but relocating the P.S. is driving me nuts. It can't bolt straight from the two p.s. mounts to the holes in the front of my head because the spread is off by half an inch. Is that where it is intended to mount? Pics would be great, please help!!
Status
Not open for further replies.
1 - 4 of 4 Posts
nobody has this kit?
I have the 50resto a/c delete kit that moves the power steering pump in a higher position. It's like 35 and bolts into the head, then two new bolts thread into that bracket.
ghostdog, how do you like your zirgo fan. I saw those on ebay, 3300cfm from a 16 in. fan. I was considering throwing my spal on my jeep and getting one of those. They were only like $115 with the relay.
1 - 4 of 4 Posts
Status
Not open for further replies.
Top