Ford Mustang Forum banner
Status
Not open for further replies.

Rear Deck Shaker Speakers

4K views 13 replies 9 participants last post by  a_manifestation 
I replaced mine in the doors and the rear deck.

I just clipped the end of the speaker connector and hard wired and soldered the new leads on, no adapters necessary. Compare the connector to the speaker... find the color of the wire connecting to the positive terminal on the speaker and be sure to use that color as your positive lead.

As for the factory screws, if I recall they are star head screws, a ***** to get out. I used screws, washers, lock washers and nuts to re-attach the new speakers. I found this much easier than trying to screw the old ones back into the panel. I used the factory grilles so as not to advertise to the ones that may want what I have and are not willing to work for it.




fitch615 said:
2 questions:
1. How do you get those screws out to remove the speaker? Does the entire back deck come off or something?
2. If you were to get speakers that had their own grill, you would be able to use them (without fabricating an entirely new back deck) correct? You would need to keep the stock ugly plastic grill?
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top