Ford Mustang Forum banner

replacing speedo cable

1375 Views 3 Replies 3 Participants Last post by  etsxp
Hey guys so my speedo cable was sitting on my headers for quite a few miles before i caught it, But it was too late it finally frayed and snaped so now i dont have a speedo.
Just looking for a write up on what needs to be removed to do the replacement ( dash, steering wheel,ect) thanks guys anything will help. Btw my stang has cruise control :bigthumbsup
1 - 1 of 4 Posts
Not too bad of a job.

You will need to remove the cover around the steering column, then the gauge cluster surround, and then gauge cluster.

The cable simply unclips from the back of the gauge cluster.

Move to under the car, pull the clip on the speed sensor on the drivers side of the transmission, and the cable pulls out.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.