Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
New here!

Bought a 65 Convertible a month ago. The entire body, frames, pans and miscellaneous were redone to primer about 13 years ago with NOS parts. Has been stored ever since. It is gutted and ready for the long climb back onto the road. A 6 cylinder auto car that I'm converting to a 94 roller HO w/carb. I've found an early bronco 9" to put in as a part of the 5 lug conversion. Also lucked out and found a complete drivetrain..bell/flywheel/clutch/4 spd toploader/yoke and driveshaft from an early Cyclone. I'm thinking a disc to disc rack & pinion IFS kit for the front. Car is complete, except for the conversion to V8. I'm modding to make a nice drivable car, yet custom enough to maybe have a glimpse of the new boss era machines.

Did I mention this is my first redo?

This site has been helpful with my many questions I've found answers to. Maybe I'll be able to offer some solutions I've found along the way.
 

·
Registered
Joined
·
275 Posts
Sounds like a sweet project. Expensive front end there....
 
1 - 2 of 2 Posts
Top