Ford Mustang Forum banner

1 - 3 of 3 Posts

Registered
Joined
15 Posts
Discussion Starter #1
Hello, I have a 1969 grande mustang I would like to put my 2006 pony package mustang wheels (17x8) with 235/55/17 Yokohamas on it. Prior to buying new wheels (18x9, 275\40) for my 06, I test fitted the 17's on the rear of the 69 with decent fitment (obviously could use spacers). I couldn't try the fronts until today due to the brakes not being togther. However the fronts will not seat correctly on the hub 馃槶 The hub is tapered and the wheel seems to only fit on the first half of the hub.

Is it possible that I could use a spacer without overstreasing the studs? Or if not could an adapter work, or any other suggestions?

Thanks in advance, Aidan
 

Registered
Joined
405 Posts
I never like to use spacers or adapters because if you don't get good quality they could break.
 

Registered
Joined
1,791 Posts
Check Mustangs unlimited there is a spacer kit available to use these wheels on a 67-73 cars, about 275 fir the set. The backspacing on the new wheels wont let then just be mounted as is and work.
 
1 - 3 of 3 Posts
Top