Ford Mustang Forum banner

Status
Not open for further replies.
21 - 40 of 99 Posts

·
Registered
Joined
·
10,877 Posts
Everything you need to know about cams

Cam technical information.
 

Attachments

·
Registered
Joined
·
767 Posts
Bumper cover removal procedures

Front bumper is really easy to remove and reinstall.
 

Attachments

·
Premium Member
Joined
·
72,882 Posts
Discussion Starter #24
Spark Plug Firing Order -- V6 and V8

4.0L V6

CID 245 Firing Order 1-4-2-5-3-6


4.6L V8

CID 281 Firing Order 1-3-7-2-6-5-4-8
 

·
Premium Member
Joined
·
72,882 Posts
Discussion Starter #27
Crank pulley torque specs

Crankshaft pulley bolt
Install a new bolt and washer and tighten the bolt in 4 stages.

Stage 1: Tighten to 90 Nm (66 ft. lbs.)
Stage 2: Loosen 360 degrees.
Stage 3: Tighten to 50 Nm (37 ft. lbs.)
Stage 4: Tighten an additional 90 degrees.
 

·
Premium Member
Joined
·
72,882 Posts
Discussion Starter #28
GT Intake Manifold Torque Specs

For those thinking of adding the CMCV delete plates. Tighten in the sequence shown to 10 Nm (89 inch lbs.).
 

Attachments

·
Premium Member
Joined
·
72,882 Posts
Discussion Starter #30
V6 & V8 spark plug gap specs

Spark Plug gap specs:

4.0L V6: 0.052-0.054 inch.

4.6L V8: 0.040-0.050 inch. (non-adjustable)
 

·
Premium Member
Joined
·
72,882 Posts
Discussion Starter #37
Rear Axle

Rear axle (service manual).
 

Attachments

21 - 40 of 99 Posts
Status
Not open for further replies.
Top