Ford Mustang Forum banner

Status
Not open for further replies.
1 - 20 of 20 Posts

·
Registered
Joined
·
386 Posts
Discussion Starter · #1 ·
:santa

I was thinking of the theme to 2001 Space Odessy as I opened this :happyhapp

Power in the hands of a few begins 9/7/2005 :strut :strut

http://www.ozziesrobots.com/131244920.jpg :help:
http://www.ozziesrobots.com/1314d9530.jpg :shocked:

http://www.ozziesrobots.com/1310e86d0.jpg :laughlitt

http://www.ozziesrobots.com/131839670.jpg :tongue

http://www.ozziesrobots.com/131a7fb60.jpg :eyepoppin

http://www.ozziesrobots.com/131c6e8f0.jpg :naughty


9/7 starts:

Saleen S/C
Pulley for 6-8 lbs boost
Bassani SS Axle Back w/4 " Rolled tips
CAK

XCal2
Dyno Tune
39lb Ford Racing Injectors

:clap :green :gringreen :heha: :D :grinroll:


Wish me Luck !!

Will Post how it all turns out & post some Dyno Specs

PS Sorry for all the emoticons ..can't help it ..luv the little critters LOL !
 

·
Registered
Joined
·
829 Posts
oh yeah! I'm likin' it! I think it's a great setup. Congratualtions..... or should I say: "Merry Christmas" hahaha

Russ
 
G

·
Dayum! That's going to be sweet. Totally diggin that, you gotta post your numbers afterwards (we'll all be interested).
 

·
Registered
Joined
·
386 Posts
Discussion Starter · #5 ·
Yo Thanks Dudes :drink:


Forgot to Mention ..Going with 3.73 gears from ford racing...Power Surge is doing the install & 9/7 is the quickest they can start ..I will most definately post #'s as soon as it's dyno'd & will try to get out to Englishtown or somewhere to get some times....Holding off on Long Tube headers & Bassani X-Pipe until I get RWHP #'s ...I hope to break 400 rw..& may boost it up to 8lbs . Ultimate Goal is 450 RW ...but will be happy at 400 & above. If I go with Long Tubes will just go with Off road X Pipe (No cats) until inspection time.

Can't wait to ice the factory shift pattern & :madas: throttle lag.

best part will be wasting the unsuspecting bavarians & assorted vettes. :smoke:

& OH yeah will break down & add some hood struts too :rolleyes:

Will keep ya all posted..Cheers !
 

·
Registered
Joined
·
151 Posts
That SC looks finger licking good.
 

·
Registered
Joined
·
386 Posts
Discussion Starter · #9 ·
Madhouse said:
**** I just realized - 9/7 is only a week and a half away

go OZ !!!
Well the wheels were dropped off today :eyepoppin ..Shoulder surgery tomorrow..:thumbdown so in about 2 weeks my wife will report the results ..:doh:

Will post the Dyno #'s as soon as they are available .

To remind ya' all

Saleen S/C
CAI, MAF & Filter

Bassani Cat Back
39 lb injectors
X-Cal2 tune for 91 oct +++

3.73 gears
Custom Pulley for blower ( to bump up saleen boost to around 6-8 lbs)
Red Line Hood struts ( to make it look pretty LOL )


See ya back in about 2 weeks :smoke:
 

·
Registered
Joined
·
271 Posts
Good luck with your surgery - and your mods, Roboz.
 

·
Registered
Joined
·
110 Posts
I wonder where that casting was poured. I was at Saleen's anniversary party today in Irvine and they don't pour any iron there. What did the box say? Maybe Mexico. I hope not China.
 

·
Registered
Joined
·
5,003 Posts
KBE said:
I wonder where that casting was poured. I was at Saleen's anniversary party today in Irvine and they don't pour any iron there. What did the box say? Maybe Mexico. I hope not China.
I thought they were made in the same factory as most others (KB, Whipple, etc.) in Switzerland or was it Austria...???
 

·
Registered
Joined
·
137 Posts
I am in AWE.....

I *want* one!!!

Of course, it will take some time to scratch together the five large... DAMN you must be EXCITED AS HELL!!!

:worship :worship :worship

Can't wait to see how the SC mod turns out! Keep me (us) posted, because I too want that SC unit and can't wait to try it out.
 

·
Registered
Joined
·
386 Posts
Discussion Starter · #15 ·
Well was checkin on the cars progress today, unfortunately the 39lb injectors haven't arrived so the blower install is delayed :sosad:

Luckily the red line hood struts weren't installed. Decided to change to MRT's so as not to have to drill holes..will probably get the bracket powder coated , not crazy about the stainless look.

Anyway while there I popped a few pics of Sal's Car...He had the Saleen name ground out of the S/C, painted/coated & had SVT Tags mounted ...Looks pretty cool , Pics are a bit lame..bad lighting. Here goes though.
 

Attachments

·
Registered
Joined
·
172 Posts
damn man, you've got your blower, but no injectors - - I've got my injectors, but no blower

:(
 

·
Registered
Joined
·
5,003 Posts
I have it all, and some more... in a huge box... but can't install due to other people and I guess in part Katrina... :sosad:
 

·
Registered
Joined
·
6 Posts
CAI with Supercharger

Hello,
My name is Casper. I recently had a Saleen 475 hp Supercharger installed in my 2007 Mustang GT. I am running a tune from Brenspeed for the supercharger due to the one from Saleen was pretty lame.
I noticed in your pictures that you are running a CAI unit. What brand is it. I have the MAF housing that I used on my C&L CAI and the filter, and would like to know if I can use these on my setup without any problems? I am currently using the upgrade tube and Saleen upper air box lid with the bottom of the air box cut out.I do not have room for the C&L Street intake tube, for it hits my hood. But I would really like to use the C&L MAF housing and filter for better air intake. Would it create a problem using these two items? Remember, I am running a tune from Brenspeed and I am not sure if I can use those items. Brent is out of town and so I can not ask for his advise right now.
I would really appreciate any help you all can give me.

Thanks,
Casper
 

·
Registered
Joined
·
3,724 Posts
Wow, resurrecting a 2+ year old thread. LOL.
 

·
Registered
Joined
·
193 Posts
Saleen SC

How did you dyno? Im running in circles of what to do next; cams/no2, sc, turbo....

My MAIN goal is to keep the car enjoyable, not miserable on the street...

How does the Saleen feel on the street, in traffic??
 
1 - 20 of 20 Posts
Status
Not open for further replies.
Top