Sequential Turn Signal Issue.

547 Views 2 Replies 2 Participants Last post by DavidLee93, May 25, 2015

DavidLee93

Discussion Starter · May 21, 2015

I recently bought the sequential turn signal plug and play harness from american muscle. I changed the bulbs to 3157 leds and they worked for about a day then the outer most socket on the passenger side would flash to the turn signal, but it would flash when hazards are on and when you press the break. I even plugged the old harness in and the same socket worked fine. I dont know what happened. Help?

Save

1 - 2 of 3 Posts

DavidLee93

Discussion Starter · #3 · May 25, 2015

AMAlexLazarus said:
Sorry to hear about the trouble here David - Have you tried swapping your OEM/stock bulbs back in to see if it's still acting if? I have a sneaky suspicion that they could be the culprit. Let us know and we're here to help.

Alex

I tried what you said but it didn't help. What doesn't make sense I'd that the driver side works fine, it's only the passenger side that is not working right.

Save

1 - 2 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month