Sequential Turn Signal Issue.

546 Views 2 Replies 2 Participants Last post by DavidLee93, May 25, 2015

DavidLee93

Discussion Starter · May 21, 2015

I recently bought the sequential turn signal plug and play harness from american muscle. I changed the bulbs to 3157 leds and they worked for about a day then the outer most socket on the passenger side would flash to the turn signal, but it would flash when hazards are on and when you press the break. I even plugged the old harness in and the same socket worked fine. I dont know what happened. Help?

Save

1 - 1 of 3 Posts

AMAlexLazarus

· #2 · May 21, 2015

DavidLee93 said:
I recently bought the sequential turn signal plug and play harness from american muscle. I changed the bulbs to 3157 leds and they worked for about a day then the outer most socket on the passenger side would flash to the turn signal, but it would flash when hazards are on and when you press the break. I even plugged the old harness in and the same socket worked fine. I dont know what happened. Help?

Sorry to hear about the trouble here David - Have you tried swapping your OEM/stock bulbs back in to see if it's still acting if? I have a sneaky suspicion that they could be the culprit. Let us know and we're here to help.

Alex

Save

1 - 1 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month