Ford Mustang Forum banner

Serious Issues with Clutch. Need help

701 Views 5 Replies 5 Participants Last post by  roger0416
I have a 1999 Mustang GT 4.6l

Hey guys, so I can't find any information on this anywhere else...

I burn my clutch about 3 weeks ago, I was going into third and it like kind off went half way and than BAMF the pedal go soft, it was hard to go into gear, the clutch smelled all of it.

So I ordered a RAM, Clutch, RAM Flyhweel, NEW pilot and Throw out bearings and a STEEDA Clutch cable.

I had ALL the parts installed a t VERY reputable shop 2 days ago. I drive for 2 days and just last night the SAME thing happens... I'm shifting into third and again, the pedal got soft, and I could not put the car into gear at all, like i had to turn the car off, put it into gear and drive home.

I talked to my mechanic and he said that it could be a faulty part or that my cable / quadrant are not releasing the disc completely and therefore burning my clutch disc.

I'm not sure of what's going on :( I'm so stressed out about this. What can cause my clutches to burn burn up like that...

I need some help here.
1 - 1 of 6 Posts
Did you just replace the cable only? :nono: stock quadrant and adjuster is junk in my mind killed my new throwout bearing so I installed complete steeda cable kit.

I am gonna assume you may not have replaced the quadrant and adjuster as well and I highly recommend that so buy the rest of the steeda kit for the cable install and try that :bigthumbsup
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.