[meangreen92]

I thought I heard somewhere that an MSD coil should be mounted with the terminals facing up. Has anyone heard anything like this? I'm about to start rigging up some bracketry.

 

[meangreen92]

Cool, I went ahead and used some L brackets, so it's facing upright. I didn't use the vibration isolators as one of them is missing the screw. Is it ok like that?
Nice Capri!!! I had an '84 RS 5.0 5 speed. Sold it to a neighbor, he turned around and moved to Tennessee - but now he's got his Dad to help him fix it up. Buyer is a 21 year old kid, but, he can weld - and most T-top cars could stand to be welded on around here... He also has a talon, so you could say I'm helping to cure a ricer!

 

[meangreen92]

Yeah, I guess I should install some dampening - I'm thinking longer screws and some slivers of vacuum hose as isolators. It is a universal Blaster SS. It mounts with three screws which thread into a rubber isolator which has a screw glued to it. It's on the car now, I can feel a little difference up around 5000 RPM.
On the subject of Capris, check this out: http://www.foureyedpride.com/phpBB2/viewtopic.php?t=21491