Ford Mustang Forum banner

Sound System Upgrades

1147 Views 5 Replies 5 Participants Last post by  Jawnnyy
Hey guys, I'm new to the forum and this is my first post so if it's not up to par with everyone else's I apologize in advance. I recently began an aftermarket audio system on a relatively low budget. I have bought all the components, and everything is in working order and installed properly, however my 2 subs will not make a sound. The 2-channel amp is on, all of the different settings to no avail. The amp is rated at 400 watts, and my worry is it's not strong enough to power both the stock speakers and my aftermarket ones. Any tips/ advice would be wonderful Thanks!
1 - 1 of 6 Posts
I'm confused, it's a 2 channel amp but you say it's powering all your stock speakers fine? So you have 6 total speakers on a 2 channel amp???

Do you have a 50w (peak) X 4 aftermarket headunit? That should be enough for your 4 normal speakers.

What RMS is your subs and what RMS is your amps? I think even if it's underpowered you should still get some output.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.