Ford Mustang Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
182 Posts
Discussion Starter · #1 ·
OK so i did a 3g alt conversion, and had a bad surging problem so i cleaned my maf sensor and positioned my tps sensor to .997 the surge cleared up alot but is still there. im so lost. can any one help me
________________
 

·
Registered
Joined
·
282 Posts
Did you unplug the IAC motor before setting your tps? I just did mine and this is how I did it & it idles great now.

Unplugged IAC motor, then I adjusted the idle up so it would stay idleing, turned of the engine, then I set the tps to .98v, plugged the IAC motor back in.
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #3 ·
im try this i hope it works, cuz it very irritating wen u pull up to other cars and ur car sounds like its die smh
 

·
Registered
Joined
·
182 Posts
Discussion Starter · #6 ·
thank u but its not my idle that surges its the amperage
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top