Ford Mustang Forum banner

tail lights problem

689 views 2 replies 3 participants last post by  GT500MUSTANGFAN 
#1 ·
Hello Guys this is my first post.
I searched and could not find anything similar to my problem.
any help would be great.

I have a 2005 V6.

my problem is with the sequential tail lights.
I had 2 bulbs burn out, 1 on each side.
I replaced all the bulbs while I had the tail lights off.

Now only the the inside light will work on both sides, the other 2 bulbs on each side do not work.

any ideas?
 
#2 ·
You could try swapping the bulbs around in the different sockets; I'm not being a smart-aleck, I had a similar problem with my wife's 01 BMW Z3, I had to swap the left and right turn signal bulbs to get them to work, and for the signal clicker to stop working double-time. I hope this might solve your dilemma! Slainte'!
 
#3 ·
I assume you're talking about the original/non-Gen 5 sequentials.

Are they the Plug n' Play versions or the Splice in versions?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top