Ford Mustang Forum banner
Status
Not open for further replies.
1 - 12 of 12 Posts

·
Registered
Joined
·
558 Posts
Discussion Starter · #1 ·
hi, am really happy, because i just take my car to get it tune and dyno,
what you guys thing my car's horse power will be?

my mods.

88' Ford Mustang GT.
stock heads but port & polish,
1.6 roller rockers,
+40 sealed power piston,
z cam,
trick flow upper & lower intake,
high volume oil pump,
30lp injectors,
novi 1000 supercharger,
bbk 255lph fuel pump,
msd 6al,
jacobs ignition coil.
70mm holley throttle body,
70 mm bbk spacer,
75mm mass sensor,
bbk 1 5/8 headers
aluminium driveshaft
a/c delete
smog pump delete
battery relocation kit.
i don't know the rear end, i think is stock,
car weights like 3250 lbs.
may be more stuffs, i don't remember.

so wat u guys guess, i will post my dyno's time as soon as i get them, so you can see how close ur guess was.:bigthumbsup
 

·
Registered
Joined
·
2,361 Posts
I'll say 350rwhp and about 370rwtq.
 

·
Registered
Joined
·
477 Posts
what boost?? 6-9lb i would say 360rwhp and 380rwtq.haha

290/300 is a little low i think
 

·
Registered
Joined
·
398 Posts
Id say 340rwhp & 350rwtq.....
 

·
Registered
Joined
·
3,781 Posts
I'd say about 375rwhp and 370rwtq but with the combination of stock heads and the Z cam, the engine's gonna feel as soggy as a wet sock at low revs. The B cam would be a better choice.
 

·
Registered
Joined
·
1,138 Posts
I'd say about 375rwhp and 370rwtq but with the combination of stock heads and the Z cam, the engine's gonna feel as soggy as a wet sock at low revs. The B cam would be a better choice.
He says he has stock gears, which can't be any higher that 3.27's (AOD). It might even have 2.73's. That + a "Z" cam = 2 wet soggy socks. You need some gears Grasshopper.
 

·
Registered
Joined
·
558 Posts
Discussion Starter · #9 ·
MY CAR IS A 5spd, and i got my car back from the shop, but they couldn't get it on the dyno, because some electric problems on the car, but the guy that do the dyno said, that my car is easy around 350 whp, so thanks to everybody.
 

·
Registered
Joined
·
1,202 Posts
Dont even do the dyno put that money into your gears:bigthumbsup
 

·
Registered
Joined
·
558 Posts
Discussion Starter · #12 ·
thanks for the advise, i'll try to take it to the track this weekend, but i don't have et tires, so i will run with my street tires, i got 285/40/17, so they are i alittle big, but they spin alot.
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top