Ford Mustang Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
958 Posts
Discussion Starter · #1 ·
Hey guys i bought an intake gasket set, the TB gasket has a round hole in the middle, my TB isnt just round it has a slot for the tps, do i instal as is or cut the gasket? I have a 2.3 turbo Xr4ti
 

· Registered
Joined
·
129 Posts
That's how is supposed to be. The odd section your referring to is for the IAC valve to bypass the throttle plate to control the idle.
 

· Registered
Joined
·
4,626 Posts
I don't know why got idle issue with these 2.3. Mine has some problem with it but I have fmic and modified. One thing that helped mine was a used Escort IAC. Must get plug connection if using that IAC. It was free so I tried it. Better than all the other junk 2.3 IAC I had. Maurice
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top