Ford Mustang Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
304 Posts
Pony said:
Have them and am removing them to paint calipers and I need the torque spec for these wheels anyone?
Thanks. 18 inch alum fans.
I believe the lugnut torque spec is 100ft/lb
 

·
Registered
Joined
·
5,754 Posts
All correct answers. Mine havent fallen off yet.
 

·
Registered
Joined
·
4 Posts
Torque spec for 18" OEM aluminum wheels

I'm just tagging a question onto the one Pony had about the torque setting for his 18" alum. fanblades. Does the same 100 lb.ft. setting also apply to the 18" polished alum. "Bullitts" I ordered with my '06 vert.? Thanks for your help.
 

·
Registered
Joined
·
4,911 Posts
It's what is commonly used on all cars. I used it for my stock wheels and now for my AM wheels and the drags when going to the track...
 

·
Registered
Joined
·
12,807 Posts
manual says 100lb.ft, Those are the wheels I have, 1/2X20 inch bolt.
page 173, roadside emergencies.
I believe it has to do more with the bolt size than the wheel.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top