Ford Mustang Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
175 Posts
Discussion Starter · #1 ·
I recently bought a 306 and took the rod bearings off to check the condition of them. I was wondering if anybody knew the torque specs for them with a casting number that is D10E-AA.

Thanks
 

·
Registered
Joined
·
114 Posts
yeah 19 to 24 if you need ne more torque specs hit me up be careful i would replace the rod bolts if they are stock because they stretch u probably know that
 

·
Registered
Joined
·
2,305 Posts
Just looked in my chilton cuz 19-24 ft. lbs. sounds to low but hes right. It is 19-24ft lbs
 
G

·
5.0L Torque Specs


Belhousing to engine bolts
28-38 ft/lbs


Camshaft sprocket bolt
40-45 ft/lbs


Camshaft thrust plate to engine block bolts
108-144 in/lbs


Crankshaft pulley to vibration damper bolts
35-50 ft/lbs


Cylinder head bolts
-1979-1992

--Step 1
55-65 ft/lbs
--Step 2
65-72 ft/lbs

-1993-up

--Step 1
25-35 ft/lbs
--Step 2
45-55 ft/lbs
--Step 3
75-85 ft/lbs

Differential shaft lock bolt
15-30 ft/lbs

Driveshaft U-joint to pinion flange bolts
70-95 ft/lbs

Exhaust manifold bolts
26-32 ft/lbs

Flywheel mounting bolts
75-85 ft/lbs

Front engine mount nuts
72-98 ft/lbs

Intake manifold to head bolts

--Step 1
96 in/lbs
--Step 2
16ft/lbs
--Step 3
23-25 ft/lbs

Intake manifold (upper intake to lower)
12-18 ft/lbs

Oil filter insert to engine block adapter bolt
20-30 ft/lbs

Oil pan mounting bolts

-1979

--Step 1 (Large bolts)
11-13 ft/lbs

--Step 1 (Short bolts)
7-9 ft/lbs

--Step 2 (Large Bolts)
15-17 ft/lbs

--Step 2 (Short Bolts)
10-12 ft/lbs

-1980 to 1987
9-11 ft/lbs

-1988 to 1993
6-9 ft/lbs

-1994-up
110-144 in/lbs

Oil pickup tube to main bearing cap nut
22-32 ft/lbs

Oil pickup tube to oil pump bolts

-1979 to 1987
10-15 ft/lbs

-1988-up
12-18 ft/lbs

Oil pump mounting bolts
22-32 ft/lbs

Pinion bearing preload
8-14 in/lbs

Pressure plate to flywheel bolts
12-24 ft/lbs

Rocker arm fulcrm bolts
18-25 ft/lbs

Rod Bearing Cap Nuts
19-24 ft. lbs.

Spark plugs
7-14 ft/lbs

Timing chain cover bolts
12-18 ft/lbs

Vibration damper to crackshaft bolt
110-130 ft/lbs

Wheel lug nuts
85-105 ft/lbs
 

·
Registered
Joined
·
175 Posts
Discussion Starter · #5 ·
Thanks alot. This will really help with my engine build!
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top