[boss306]

going to soon buy a pair of trick flow twisted wedge heads what do i need for the swap besides the gaskits the engine has 150000mi and i just want to buy the bare minimum now to get the car running now and when income tax is here then buy the cam intake etc i just want to get the parts that will get me back on the road and also does anybody have any idea of what kind of increse in HP & TQ i can expect thanks for any help.

 

[347Vert]

With that many miles you might want to consider saving up for rebuilding the motor. Further, I would wait until you get the intake and cam to go with the heads before making changes. Rebuilding, TW heads, decent cam, and intake you could see anywhere between 100-150 horse difference from the stock 225hp.

 

[Keving]

Really the gasket set, and some RTV is all you need right now as far as a must have. I would get an ARP Bolt set though. They are cheap, and some good insurance for the added compression you get with those heads.

 

[89coupe]

Gonna need pushrods, stud mount roller rockers, guide plates if they are not on there.

Push rod length needs to be checked with a PR checker. Stock PR's won't work, they are too short. Need gaskets.