Ford Mustang Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
According to the directions from Trick Flow it says I need to seal the oil gallery cap plug that is on the rear block rail with epoxy so oil doesn't get past the baffle. Why is this necessary is the baffle too small. Anybody have any advice? Is it really necessary?
Thanks.
Jason
 

·
Registered
Joined
·
46,020 Posts
I haven't heard of that one and I use the Track Heat intake. Maybe I missed something?
 

·
Registered
Joined
·
65 Posts
Discussion Starter #3
I thought the street heat and track heat lower were the same just the upper is different. Anyway I emailed Trick Flow I will see what they have to say.
Thanks Eagle.
 

·
Registered
Joined
·
46,020 Posts
Yeah, the lowers are the same so I'd like to know if I missed something myself, I haven't had issues by not doing what you mentioned so I'm thinking it may not be necessary. But see what they say.
 

·
Registered
Joined
·
65 Posts
Discussion Starter #5
You didn't miss anything Eagle. Apparantely there is an oil gallery plug on the rear block rail that is already sealed from the factory, why it is included as part of the installation process I don't know. Thanks for all your help.
 

·
Registered
Joined
·
46,020 Posts
Well thanks for letting me know too.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top