[jet228]

Hey guys... first time poster. I just purchased a sweet grille delete for my 03 V6. I was getting set to install it last night, but all the instructions that came with the product, and everything I've found online tell you that the first step is to remove the SCREWS at the top of the grille and holding the faschia.

I don't have screws, I have these weird clip things. They look like they have a hole made to slide a flat head under to pop off, but when I tried that with one, it snapped. I have a couple of pictures to show you what they look like:

Sorry for the poor picture quality. Does anyone know how to remove these, or alternatively, what screws to replace them with if I decide to snap them all off?

Thanks!

 

[V6andwhat]

Yes there will be about 4 clips on top and four screws more on the botton, the botton ones u are not gonna B able to remove it unless u take ur bumper out
I Just finish installing a set of fog lights when i took off the bumper and I saw them ... take a look at this old pic i have here

 

[thehill63]

its actually pretty easy to do a grille delete without taking the bumper off

 

[V6andwhat]

Well NEver done it but for what i saw today there r four screws holding the grille on the botton that the easiest way is to get there is removing the bumper

 

[jet228]

Thanks guys... I actually got a buddy who isn't a moron like me to help. the pins pulled straight up once he got them loose on top. I even re used them for my delete kit.

As for the screws underneath... he just gently pulled the fascia up and used a socket wrench to undo them.

The Mach 1 grille delete looks AWESOME btw... highly recommend it for anyone who has the stock honeycomb with the corralled pony.

I will post pics later.

Thanks again.