Ford Mustang Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
215 Posts
Discussion Starter #1
I was wondweing about a good order to do certin upgrades for my car. Here is my plan, any advise.

1. Tranny (Either HD AOD or T-5 Conversion).
2. 5 Lug Cobra Disc Brake Conversion & 17x8 Rims/Tires.
3. TFS Heads, Intake, Cam, Timing Chain, and headers.
4. Cat Back Exhaust.
5. Body work.

I am not sure wht I want to do with my supension yet and when. I am hoping this combo will get me close to 350 RWHP. Ofcourse I have not incuded/orked out all the details yet, so feel free to make suggestions! :laughlitt
 

·
Registered
Joined
·
2,975 Posts
do exhaust, first
suspension and brakes second
trans third
then the engine.
actually before all that you may want to do body work and paint, that way if you get overspray on your brakes/ exhaust or engine bay. then you are just goin to get new stuff anyway.

for the trans, you can put a 4R70W planetary gearset for faster acceleration in 1st and second. you can also use a pressure plate and additional clutch disc in the direct clutch drum (more holding power) from a late 80s early 90s mark VII LSC

you can also use a aode overdrive servo piston and cover as well as the over drive band. wider band, and bigger servo piston= more holding power.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top