Ford Mustang Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter #1
For the valve cover that says, Ford Turbo (aluminium), I used the cork valve cover gasket. This thing just LEAKS and is garbage in my opinion.

Any suggestions, and/or part numbers for a good, non-cork gasket?

Thanks!

Turbo Drew :circlingsmilies
 

·
Registered
Joined
·
693 Posts
Go to your local Ford dealer and order part #F57Z-6584-A. A little pricey but worth every cent. It will never leak, guaranteed!
 

·
Registered
Joined
·
283 Posts
fel pro also makes a neoprene version thats what im putting on my car
 

·
Registered
Joined
·
1,636 Posts
I'm not sure if it's the same one that evintho suggested, but the ranger VC gaskets with the metal in them are apparently the best, and they are also re-usable which means that you can pull one from the JY!

Steve:bigthumbsup
 

·
Registered
Joined
·
1,854 Posts
The blue fel-pro is usually a baad seal. I can say that I have only heard of 1 person that was ever satisfied with the blue one.

The Ford re-useable is good.

Forced4 sells them as well.
 

·
Registered
Joined
·
52 Posts
Discussion Starter #6
The blue fel-pro is too thick for the turbo valve cover it pushes out, so if u can get a cork to work leave it alone but it is a one out of three chance it works. So I spent the cash and got the one from Ford and it work great the first time.


Thank for the help
Turbo Drew
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top