[marks fast ford]

i was wondering what people are doing for valve covers on moded engines, someone has removed the baffles in the stock valve covers for roller rocker clearance, so now oil comes out through the oil filler, have been looking but no luck, im running a spider intake so i should have alittle more clearance then most,
thanks

 

[need4spd90]

i still run the stock covers,i didnt remove the baffle,i just pounded it flatter with a hammer..

 

[Smurf stang]

I run TF standard valve covers that I welded a baffle in there and my comp golds clear.

 

[stangdawg]

Be careful with your choices. I went with Ford Racing valve covers and 1.7 rockers and had no clearing problems with the rockers.

However I had to get an intake spacer so the throttle plate would clear the valve covers. That caused my intake to sit too high and require a cowl hood instead of a stock hood. Living this nightmare as we speak.

Even with using vert motor mounts it still sits tok high.