Ford Mustang Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
187 Posts
is the new cam stock ? if not then you'd need to buy the right spring for the lift of your cam, and have a machine shop install them at the correct height , then you wont ever have to worry about float
 

·
Registered
Joined
·
187 Posts
unless you have the proper tool to check the lbs. presure, and proper install height for the pedastal mount rockers, i'd suggest a recommended local machine shop.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top