Ford Mustang Forum banner

Vinal stripes on curved surfaces....

1137 Views 4 Replies 4 Participants Last post by  Vandil
I'm wanting the wrap around stripes for my 06 when it comes in. I have been talking to my salesman at the dealer and he says their installer won't go around the bumpers because the vinal will eventually crack there. He says if I take it to some other installer They will most likely use razor blades to trim around the 3rd brake light and l/p opening and that will void the warentee on the clearcoat. I see alot of people have the wrap around stripes out there. Has anyone had these issues?
I'm looking for installers in the St. Louis area if anyone can recommend one.....
Status
Not open for further replies.
1 - 1 of 5 Posts
How much does it cost to paint on the stripes? Wouldn't the paint last as long as the rest of the paint job? I know painted-on pinstripes used to be more than tape because not everyone could do it but wouldn't it be better to paint on your racing stripes so they "blend" better? Or is the vinyl beveled enough that you won't hit it with a buffer or build up wax at the edge?
See less See more
1 - 1 of 5 Posts
Status
Not open for further replies.
Top