[dwnlowx]

i just got a cobra intake and heads with injectors basiclly done with the install i took my time and cleaned my engine bay up
well now im wondering what injectors to use either my stock injectors or the cobra injectors


will i need to mod my computer

will i need a different mass air meter

is there any thing that i might wanna do or should do

this is my first mustang engine build so please lend a hand

 

[EagleAutosports]

The 1993 Cobra engine had 24 pound injectors and a specific ECM. If all you did was a head and intake swap, you can keep your stock 19 pound injectors, mass air meter, and not need to change anything to the computer. But what mass air do you have on it now? If you use the Cobra meter, you'd have to swap to the 24's.
What other mods do you have?

 

[MadMatt]

You might be alright with the stock injectors still, but if you want to be safe (and have room to play for future modifications) then it would be best to go with the 24 lb/hr cobra injectors. You would either need a MAF sensor calibrated for the 24lb injectors, a tune done to the computer to tell the computer it has 24lb injectors, or you could also use a cobra computer in conjunction with the cobra meter.