Ford Mustang Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
hey
i can get a msd pro bilet ready to run for 375, or i can get a street fire ignition and wires,pro comp distribtor , wires and coil for 300. i need to upgrade my ignition badly.what would be best?
 

·
Registered
Joined
·
621 Posts
Depends what for. I'm running stock components and don't have a single problem despite mixture being rich, 6500 RPM shift, and 8 pounds of boost.

What you need all really depends on RPM and cylinder pressure.

Buy too much and money and plug life is wasted. Run too little and it might misfire.

http://www.w8ji.com/images/Cars/330-1.jpg

14 or 15:1 compression motor
Around .800 lift roller cam
Titanium valves
9200 RPM shift
Well over 2 HP per CU In with single 4bbl
Dry sump
SVO block
Ran 8's at over 150MPH in a steel Mustang GT
Factory mag pickup distributor with MSD 6AL CD igniton and MSD coil

Tom
 

·
Registered
Joined
·
46,020 Posts
Get the best ignition you can afford, going on just price won't get you the best parts.
 

·
Registered
Joined
·
1,456 Posts
Are you running a carb or fuel injection?
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top