Ford Mustang Forum banner

Status
Not open for further replies.
1 - 18 of 18 Posts

·
Registered
Joined
·
794 Posts
Discussion Starter #1
theres a company going outa business and there selling cheap parts and i wanted to know if a t45 or a t3650 will fit on a v6 and if one of them is a six speed ??
 

·
Registered
Joined
·
794 Posts
Discussion Starter #2

·
Registered
Joined
·
2,867 Posts
i know the t45 wont fit...not sure about the other one.
also i believe the t45 and the T3650 are interchangeable, if they are, then neither of them will fit.
 

·
Registered
Joined
·
794 Posts
Discussion Starter #4
i was just curious it would be cool to pick up a cheap six speed:D
 

·
Registered
Joined
·
794 Posts
Discussion Starter #6
man gts have half the fun
 

·
Registered
Joined
·
8 Posts
can anyone tell me i have a 2004 V-6 3.9L with Automatic Trans and a 1998 V-6 3.8L with T-5 OD Manual Transmission i want to swap them around will it work
 

·
Registered
Joined
·
8 Posts
reason for the swapping is because my son will be getting his license shortly and the 98 will be his car and i would prefer him to have automatic in the 98 and i would prefer to have the manual transmission in my 2004 and just want to make sure i have all my ducks in a row so to speak when changing them around
 

·
Registered
Joined
·
8,348 Posts
reason for the swapping is because my son will be getting his license shortly and the 98 will be his car and i would prefer him to have automatic in the 98 and i would prefer to have the manual transmission in my 2004 and just want to make sure i have all my ducks in a row so to speak when changing them around
Again, the '98 will need to go externally balanced, and the '04 needs to be internally balanced. So, no weights on the '04 flywheel, and 28oz weight on the flexplate in the '98. So it sounds like you need a flywheel and flexplate.

You also need a transmission harness and computer for the '98 because the PCM shifts the tranny. You can get away with the auto computer in the '04, but you will get codes. To be done right, you need 2 harnesses and 2 computers as well as the pedal assembly.
 

·
Registered
Joined
·
2,747 Posts
No, they are not direct swaps. The 98 is a single port motor and the 2004 is a dual port just fore starters. There are other differences as well.
 
1 - 18 of 18 Posts
Status
Not open for further replies.
Top