Wiring 12v Plug(s) to ignition??

Get something called "Add-A-Fuse" (or something like that). It is a "fuse on a fuse" adapter and allows you to tap into an existing circuit power source while keeping the existing components properly fused. I assume you have a voltmeter too. Then open the passenger side fuse box and find something that turns on/off with the ignition - use the owners manual to help you find something. Then run a wire from the new power source to the center console with the fuse out on the new circuit. (look up how to remove the console so you don't break the tabs that hold it). Clip the power wire to the console power outlet hot wire and tape up the power source to it. Then connect the new wire to the plug wire and put in the fuse. Hope that helps.