Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
Im installing a 82015 Dry Zex nitrous system right now on my 92 5.0,im almost done,but here's my question.
The problem im having is Zex says to attach the white wire from the Zex box to the output voltage lead from the TPS,i DON'T have a volt meter.
Does anyone know what color the lead wire from TPS is (black,orange or Green)Zex says you need a volt meter to check it.

My other question is there are 2 hoses that come out of the zex box,one to the fuel regulator which you have to unplug to plug the zex hose into,the other hose goes from the zex box to a un-used vacum fitting on your plenum. Now what about the hose you unplugged from the fuel regulator that's just hanging there now,what do you do with that?
Thanks for the help guys.............
 

·
Registered
Joined
·
108 Posts
Discussion Starter · #2 ·
ya,it's the green one.:doh:

Got the hoses on right too...........:yup:
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top