[67STANG50]

I have a Duraspark II ICM with one red and one white wire hanging out. I'm told to connect the red wire to the Old Positive coil wire (presumably red with a green stripe OR green with a red stripe) and I can't find either one. I'm also told to connect the white wire to the ignition side of the brown wire under the dash after it has been cut and taped back at the connector under the dash, but I can't find a brown wire under the dash.. I can find a Yellow Wire and a Pink Wire, but neither gives me the required 6-7 volts as required by the coil. This is a conversion from I6 (200ci) to V8 (302 ci) and I realize that some of the required wires might be on the solenoid side of the engine compartment where the coil and other engine wiring used to be. Does anyone sell the wire loom just for the engine compartment that connects up to the 3-prong plug coming out of the firewall? Hope this was clear enough for you to understand my questions.. jim

 

[sp66stang]

the brown wire under the hood turn into the pink wire under the dash at the firewall connector. also red wire with green stripe is connected to the pink wire at the connector. the other end goes to the coil.